19th CENTURY 12mm PINFIRE REVOLVER. A very good example of a 6 shot Pinfire Revolver, made at the Liege Ordanance Factory in Belgium. This type is a genuine copy of the French Lefaucheau Pinfire revolvers of this era, and were adopted by many armies of the world, as a military weapon. With a 5-3/4" round barrel, now to a gray metal patina, and no pitting. The bore is excellent, with clear rifling, and a shiny finish. The o/a length is 11". The frame is equally in very good condition, with factory engraving, and again to a gray metal patina. The trigger guard, grip frame are also engraved. The 6 shot cylinder, is also engraved, and has a Liege proof mark. There is a cartridge loading gate to the rear RHS of the cylinder. Action is strong and sound, and both single and double index smoothly. There is a simple rod ejector for spent cartridges, situated to the front of the cylinder, on the RHS. There are factory fitted ivory grips, now yellowing with age, and no splits.

19th CENTURY BRITISH 2 BAND SNIDER RIFLE MK 111. A very good example, of this difficult to find, single shot military rifle, in .577 cal. With a 30-1/2" round barrel, retaining a high % of blueing. The barrel has a vg 5 groove bore, and is retained by 2 barrel bands. The word "steel" is stamped to the LHS barrel, with numerous, clear, view marks. The breech is stamped Mk111, opening sideways on a hinge, and retained by a catch, which improves firing security. The rear ladder sight is to 1000 yards. There are 2 sling swivels, and an original clearing rod. The RHS lock is stamped: "BSA & Co 1872", and with a Royal Cypher. The one piece walnut stock, is free of cracks, and has dings and Bruises, commensurate with use and age. O/a it is in vg condition. This type of rifle, was issued to Sergeants, and has a bayonet lug to the side of the foreend of the barrel. This would take a Yataghan type of sword bayonet.

19th CENTURY COLT MODEL 1849 This is a nice clean and crisp example of this .31 caliber percussion, 5 shot revolver. There is a 4" octagonal barrel, with a 2 line address to the top: "Address Col Colt, London". The serial number is 4913.....C1854. All numbers are matching. This is a no finish gun, to a grey metal patina, with some light staining, and speckling, but no pitting. The furniture is in iron . There is some scene on the cylinder, with a clear patent and serial number. The single action is tight and crisp to both half and full cock. The one piece walnut stock, is of delux quality. English proof marks are to the RHS frame, and to the cylinder. Complete with a working under rammer, and foresight

19th CENTURY ENGLISH POCKET FLINTLOCK PISTOL. A small English, boxlock flintlock, pocket pistol, with an o/a length of 6-3/4", and a turn off barrel of 2". With a slabsided walnut stock, now to a nice patina, and all metal work to a grey /silver patina, with minor speckling, and no pitting. Inscribed to the LHS receiver..."Hill", and to the RHS..."London". The number "3" is to barrel and receiver, and two proof marks to the underside of the barrel/receiver. There is a ring necked cock, a sliding safety, and a trigger guard. Action to 1/2 and full cock strong and sound. C1810

19th CENTURY LONDON COLT MODEL 1851 NAVY REVOLVER. The London made Colt Navy revolvers are similar to the contemporary examples made at Colts Hartford factory, and is a 6 shot, 36 caliber percussion revolver. However, the London pistols hvae their own serial range, 1 through 42000. This example is serial numbered 41122, made at the end of the run in 1856. Early models were sent out to the Crimean War, and later ones, such as this, were issued to officers, and used in the Indian Mutiny of 1857. The 7-1/2" octagonal barrel is stamped: "Address Col: Colt.London" There are British proofmarks on the cylinder and LHS of the barrel lug. The bore is excellent, with clear rifling, and no pitting. The serial number indicates that this is a 2nd Model. The gripstraps and trigger guard are steel, with a large rounded size trigger guard [ standard]. Now to a no finish dark patina of age, with dings, bruises, and scuffs of age, and use. The original one piece walnut grips are in good condition, and no splits. This example is a good honest example of this era, and an affordable opportunity to acquire a Colt Navy.

19th CENTURY MARTINI HENRY .303 MK 1 ARTILLARY CARBINE. A conversion from 450/577 cal to a rebarrelled 303 cal. example. Originally a Mk 111, dated 1885, converted, and inscribed to the LHS of the receiver.."HRB & Co 1896". In o/a very good condition for a Carbine, with only minor pitting to the metal parts, and dings and bruises to the 2 piece walnut stock, commensurate with use and age. This example is Deactivated to comply with Firearms regulations, and comes with a Home Office Certificate.

19th CENTURY MARTINI HENRY PATTERN 1876 SOCKET/LUNGE BAYONET. A very good example of this standard issue infantry bayonet for the Martini Henry military rifle. With a superb standard length 3 sided blade, with no defects, stains or pitting, and to a bright polished finish. Stamped to the flat top next to the socket.... 1/88, with inspectors mark. The socket has a high % blue finish, and a working locking ring. The original leather scabbard is in vg condition, with no splits, sound stitching, and only minor areas of wear. The brass mounts are stamped with inspectors marks.

19th CENTURY MAUSER MODEL 1871/84 BOLT ACTION RIFLE. A superb example of this German Military Bolt Action Magazine Rifle. With a 32" round barrel, exhibiting a very high % blue finish. The bore is excellent, with clear rifling, and no pitting. In .43 [11mm ] calibre. The breech is fully ordnance marked..... 1888......Model 1871/84.....Spandau. There are various numbers. The one piece wooden stock is excellent, and ordnance stamped to the RHS shoulder stock. There are only very minor dings. There are 2 sling swivels, a rear ladder sight, a blade foresight. and a piling rod at the muzzle, plus a bayonet lug. This type of rifle succeeded the model 1871, and was then itself succeeded by the Mauser "Commission" Rifle. They were mainly used for garrison purposes, and in particular, in the German garrison in China, during the Boxer Revolution of 1900. Most were destroyed, but those that have survived, tend to be in vg condition, as this example is.

19th CENTURY PERCUSSION HOLSTER PISTOL. A nice, large bore single shot pistol, in a used but pleasing original condition. The barrel now to a grey metal colour, with minor speckling, and pitting, but o/a to a nice patina. The lock has no markings, and is to a similar patina as the barrel. The furniture is of a Light Dragoon pistol, with an iron rammer, and original one piece walnut stock, to a nice colour/patination, with minor dings and bruises commensurate with use and age. There are Birmingham Proof Marks to the barrel. C1840

19th CENTURY SMITH & WESSON MODEL 1-1/2 FIRST ISSUE REVOLVER. This very fine example, a.k.a the "Old Model 1-1/2", was one of 26300, manufactured 1865 - 68. In 32 caliber Rim Fire, 5 shot, with a non fluted cylinder. There is a standard 3-1/2" Octagonal barrel, inscribed to the top rib: "Smith & Wesson. Springfield Mass. Pat.d. Apr 3. July 5.1859 & Nov 21 1865". Retaining a high % of it's original Nickle Plated finish, with only very minor speckling. The original 2 piece square ended walnut grips, are of high quality, with only very minor dings, The action is sound.

19th CENTURY US "GREENE/WARNER" CAVALRY SADDLE CARBINE. This Civil War carbine was made under contract for the James Warner Co., of Springfield Mass., and was made at the Greene Rifle Works, Worcester, Mass. Pat. Feb 1864. Both versions have an attractive brass frame, trigger guard and buttplate assembly. The Greene differs mainly in that the caliber is 56-50 Spencer rimfire [ instead of 50 Warner rimfire], and that it also has a saddle ring attached to a rail, on the LHS frame.. It also has a heavier manual extractor under the foreend. The 20" barrel is now to a smooth dark grey patina, with no pitting. The bore is well rifled, with areas of staining. There is a single leaf rear sight, and a bladed foresight. The 2 piece walnut stock is in very good condition, with only minor dings, hairline cracks, and bruises of use. This is one of 2500 delivered, and has a serial number...2080. Both Warners and Greene were issued to the 3rd Mass, and 1st Wisc Cavalry Regimenets. By 1870, 2500 of both types, were sold to the French, and used in the Franco-PrussianWar.

19th CENTURY US COLT POCKET MODEL 1849 PERCUSSION REVOLVER. A nice clean "no finish" example of this popular Colt .31 cal Percussion revolver. It has a 4" octagon barrel, with a clear 2 line New York Address. The barrel, frame, and cylinder are to a grey metal patina, with no pitting. There is some cylinder scene. The serial number is 32756, manuf'acture....C1852. The single action is tight, and indexing good. The original one piece walnut grips have a high % of original varnish finish. There are traces of Silver Plate finish, to the early, small trigger guard. This type of pistol was a popular purchase for the Gold Rush, in the early days of the opening of the West, and later, many were privately acquired for use in the American Civil War of the early 1860s.

19th CENTURY US SHARPS NEW MODEL 1859 CAVALRY CARBINE. A rare, and sort after example of an early Model 1859 "Straight Breech" capping breech, percusion, Sharps Cavalry Carbine, with a possibilty that this particular example was issued to the Confederacy [ see later]. As an early example, this comes with a 22" round barrel, of .52 calibre. The serial numbers began at 30000, consecutively to 150000. The early models, as this one is, had brass fittings, including a patch box to the RHS shoulder stock, brass butt plate and single barrel band. All the standard markings are clearly stamped to the top of the barrel, including the full Sharps address, and New Model 1859. All standard patents/dates are stamped clearly to both sides of the breech block. To the LHS there is a saddle bar and ring. The finish to the barrel is a plumb grey/brown patina, with no pitting.. The bore has six clear grooves, in generaly vg condition, with some areas of staining, and minor pitting. There is the standard "Lawrence patent" pellet delivery system, and rear ladder sight, to 800 yards. The original 2 piece walnut stock is, for a Cavalry carbine, in vg condition, with minor dings and bruises of age and use. There is a very small armourers repair to the top of the rear of the LHS forestock. An Inspectors Cartouche is faintly stamped to the LHS wrist area of the shoulder stock, beneath the saddle ring bar. The metalwork of the Breechblock, Hammer, underleaver, is now to a speckled grey metal patina, with no pitting. The connection to the Confederacy, is that in November 1860, the State of Georgia ordered 2000 Sharps Carbines. By December 1860, 1600 had been delivered. These New Model 1859 Carbines delivered were brass mounted and serial numbered from 31000. This example, numbered 32230, is well within the range issued. During the American Civil War, these were issued to the 1st and 5th Georgia Cavalry, plus the 2nd Georgia Infantry State troops, and the 57th Georgia Volunteer Infantry. Therefore, there is a very strong possibility that this particular carbine was issued, and used, by the Confederates, making this a highly desirable item.

19th CENTURY US TRIPLETT & SCOTT REPEATING CARBINE. Made by the Meriden Manufacturing Co., Meriden, Connecticut, C 1864 - 1865. Total number made.....5000. This example Serial No. 3445....C1864. A 50 caliber rimfire, with a 7 shot magazine tube in the butt., with the rarer barrel length of 22" [ the majority were of 30"]. The barrel is to a dark plum/grey patina, with no pitting, and a vg bore. There are sling swivels on the underside, and the heel of the butt cap. Standard markings appear on the receiver, and tang, and also "Kentucky" on the left side of the breech. This is because a contract was placed with the state of Kentucky, in January 1865, to arm 5000 Home Guard Troops to protect the supply lines of the Union Army, under General W.T. Sherman, who was at that time engaged in the Atlanta Campaign. The shoulder stock is in vg condition, but most, as this one does, show line cracks around where the magazine tube is embedded, which does not detract from the desirability of this rare carbine. The forestock is retained by a single barrel band. There is a carbine rear ladder sight, and a blade foresight

19th CENTURY US WINCHESTER MODEL 1886 REPEATING RIFLE. This is a fine example of this sort after model of the famous Winchester underlever, repeating rifle. With a 26" octaganol barrel, and full length tubular magazine. There is a high % of bluing retained to the barrel and butt cap. The flat top of the barrel shows a clear imprinted logo: "Winchester Repeating Arms Co. New Haven Conn.USA" The calibre 40-82 is stamped in front of the breech. There is a standard Buckhorn rear sight. and a blade foresight. The bore is of a vg grade, with clear rifling, and no pitting. The logo "Model 1886" is to the top breech Tang, and full patents, and the Serial No: 80399, to the lower Tang. The receiver, has evidence of case hardening. The action is sound. The original 2 piece walnut stock is in very good condition, with only minor dings and bruises, commenserate with age. C1893.

19th CENTURY US.WHITNEY BREECH LOADING REVOLVER. This is the Model.1-1/2" 32 Rim Fire 5 shot revolver. It has a 2.1/2" octagonal barrel, stamped: " Whitneyville Armory CT USA. Pat May 23 1871". There is approx 65% blue finish to the barrel, and cylinder, with a reasonable bore. The silvered frame has minor stains, and the the 2 piece "birdshead" grips are in rosewood. The action is half and full cock, and is in working order. Serial No. 19431 Manufactured 1871-1879.

19th CENTURY WINCHESTER 32 W.C.F BULLET MOULD. A nice complete example, made in metal, now to a grey metal patina, with areas of speckling, and stain of age. Stamped to the front of the tool is...."Manufactured by the Winchester Repeating Arms Co. New Haven Conn. U.S.A". Stamped to the inside of the LH arm is..."32 W.C.F". The mould for casting the bullit is sharp and clear. Finally, the original two wooden handles are clean,no chips, splits, and to a nice dark patina......C 1870 - 1895.

1st WORLD WAR GERMAN "FERNGLASS 08" OFFICERS FIELD BINOCULARS. This is a complete outfit of the Great War. It consists of a pair of "Galilean" binoculars, with a cast body, and individual eye focus. Mainly used after 1916. The clamp wheel disc is stamped "Fernglas 08 G/P Goerz Berlin", and the date "17" to the rear hinge arm. The finish is in green, and in vg condition. The optics are surprisingly vg. There is an original rain cap [ Benutzen Cap], with some wear to the green dimpled finish. There is a leather neck sling, and leather attachment between the front hinge. Contained in it's original leather carrying belt case, complete with side hinges, belt retainers, hinged lid, with the original paper instructions, in German, retained to the interior of the lid. The top front of the case is stamped "G.P.Goerz AG Berlin", and there is a metal tetaining tab to close the lid.

2nd World War Engineers Clinometer A single rotating brass measuring barrel, mounted on a black finished metal frame. Inscribed "P.T.I.Co.Ltd 1943". In it's fitted wood case, with calibration certificate, signed, and dated 1944. Lid inscribed "Pilkin London 1944" Fine o/a condition

A "BROWN BESS" 39" MUSKET OF THE NAPOLIONIC WARS. This is an example of the standard longarm of the Napoleonic Wars at the beginning of the 19th Century. With a swan necked cock, as directed by the Ordnance for the period 1776-1809. This type would have been used in the Peninsular Wars, and at Waterloo. The barrel is a standard 39" smoothbore, with a .75" cal. Condition is untouched, with the barrel to a speckled grey patina, and the original one piece walnut stock to a nice patina of age, with dings and bruises commensurate with age and use. It was made as a private purchase by "Wilson", a well known gunmaker of the period. There are London Proof marks.

A 19th CENTURY BRITISH PATTERN 1853 .577 CAL. A very fine example of a British Pattern 1853 Percussion Rifle-musket, 3rd model, in .577 Caliber. Manufactured by the London Armoury Company of Bermondsey, dated 1862. With an o/a length of 55", the round barrel is 39", retaining a very high % of finish, now to a smooth, plumb blue/brown patina. The 3 groove bore is excellent, with no staining or pitting, and probably little used. There is a rear ladder sight to 900 yards, and a standard foresight. There are British Proof marks to the rear LHS of the barrel. The plain lockplate is unblemished, and clearly inscribed "L.A.Co" Dated 1862, plus a clear Royal Cypher. The percussion hammer action is very strong to half and full cock, to an intact nipple. There are 3 screw clamping barrel bands, and standard 2 sling swivels, and the correct thick bodied jag-head ramrod. The onepice walnut stock is of very high quality, with fine checkering to the wrist and forestock. The stock is now to a very fine, dark patina, with only very minor dings of use and age. This example was almost certainly selected as a Prize, Presentation rifle, because of it's qualty, and was presented as a prize in the year of manufacture. There is a white metal plaque inset to the LHS of the shoulder stock, inscribed as follows: "Highgate First Class Prize Won By Corporal Henry William Holden August 22nd 1862". The Trigger guard and Butt plate are in brass. These prize rifles are now very difficult to find, and it is possible that there will be more information forthcoming, about the actual competition itself, and details of Corporal Holden.

A 19th CENTURY CASED "SYKES" HYDROMETER. With a brass float, not dented, and graduated, and a complete set of graduated weights, an undamaged glass beaker, and it's original thermometer, signed "Joseph Long Ltd" on an ivory base. The glass bulb is missing on the thermometer. Contained in an original fitted hardwood case. C 1885. O/a condition vg.

A 19th CENTURY D/B PERCUSSION POCKET PISTOL. A small, neat, superposed double barrelled, percussion pocket pistol, with an o/a length of 7", and barrel length of 2-7/8". Each barrel has one percussion nipple, and is activated by rotating both barrels 180*. There is one "dolphin" style percussion hammer. Each barrel has one proof mark. The receiver is lightly engraved to both sides, and all metal work is to a dark grey patina, with minor speckling and no pitting. The one piece oval section walnut stock, has minor dings of age and use, and no cracks. Action to 1/2 and full cock is strong. C 1850.

A 19th CENTURY ENGLISH PERCUSSION POCKET PISTOL. A nice quality pistol, o/a length, 7", with a 2-3/8" Hexagonal barrel, retaining a high % of original blue finish. Inscribed..."Towl", and "Boston" [ Joseph Towl of Lincoln]. There is a front sight. The receiver/lock is a silver finish, profusely engraved, including the top tang. The percussion hammer is of the "Dolphin" design. The trigger is concealed, activated when the hammer is cocked, and there is a side mounted sliding safety catch. The stock is of Walnut, of an oval/rounded section, with fine checkering, and has a white metal vacant eschuteon..O/a this pistol is in very nice condition C1850

A 19th CENTURY FLINTLOCK PISTOL BY J.WILKINSON. This is an officers holster pistol, in the design of a Newland Pattern Pistol, of 14 bore. Manufactured by James Wilkinson & Sons Pall Mall London, probably C1810. They had a Royal Warrant for supplying weapons to the Ordnance, Naval flintlock boarding pistols, and often were instructed to make pistols privately. This example has quality features, including a stepped lock, inscribed "Wilkinson", a waterproof pan, roller frizzen, and an excellent re-browned barrel, with a vg bore. All brass work is in vg condition, as is the one piece walnut stock, with the only fault being an old repaired minor crack to the LHS stock, near the muzzle [ does not spoil the o/a general appearance ]. Action of the ring necked cock is sound. There is a captive swivel rammer. An unusual feature is the flat sided, otherwise rounded butt stock. Probably purchased privately for use in the Napoleonic Peninsular War.

A 19th CENTURY MARTINI ACTION "ROOK & RABBIT" RIFLE. A very good example of a late 19th Century Rook & Rabbit Rifle. This is a single shot "Martini" action metallic cartridge rifle, in .295 calibre with a 28" round barrel, an engraved flat top, inscribed near the breech end: "Joseph Bourne & Son Birmingham". There is a 2 leaf rear sight..100 and 150 yards, and an adjustable foresight. The barrel is now to a pleasing plum/blue smooth patina, with no pitting. There is a good grade rifled bore, with no pitting. The metal receiver is now to a nice silver - grey patina, with fine engraving of birds and swirls, to both left and right sides. There is a safety lever to the RHS of the receiver. The "half" forestock is of finely checkerd walnut, and the shoulder stock is also of walnut, with fine checkering to the wrist. They are in vg condition. There is a vacant white metal escutcheon to the lower aspect of the shoulder stock. and the under lever is also engraved. The action is sound. O/a length......48". C 1885

A 19th CENTURY MARTINI-HENRY ARTILLARY CARBINE SWORD BAYONET. A now very hard to find, complete example of a bayonet,made both as a tool, and a defencive weapon. The blade is showing signs of wear, and is to a cleaned and speckled/grey finish. Blade length is 655mm, with the standard serrated top edge. The grips, and hilt are in good, to average condition. The leather scabbard is complete, but also showing signs of wear, but to an o/a pleasing appearance, and is rare to find. C1880.

A 19th CENTURY O/U, D/B OFFICERS, PERCUSSION BELT PISTOL. This is another impressive example, of an Officers 18 Bore Pistol, with o/u, double barrels. The o/a length measures to 11-1/2", with barrel lengths to 6". These are smooth bored, to a no finish, grey metal patina. The top barrel flat is feintly engraved: "J. Rigby Dublin", with some minor scoring to the top. The frame, and Dolphin Percussion hammers, are engraved. The action, to half and full cock is sound, activated by two tiggers. There is an original belt clip to the LHS, and a single captive swivel rammer, beneath the barrels, to serve both barrels. The one piece walnut butt stock is finely checkered, and has a butt cap chamber, with a sprung lid, to contain firing caps. There is also a vacant, white metal escutcheon, to the rear of the butt stock. C1845

A 19th CENTURY PAGET PERCUSSION CARBINE. This Percussion version of the famous Napoleonic period flintlock cavalry carbine, was a development, carried by Light Dragoon Cavalry. Many were manufactured as percussion weapons, mainly issued to Yeomanry Cavalry, some were conversions from flintlock. The final version, like this example, were rifled [ 3 Grooves], and the bore here is good, with some minor pitting, and sighted to 300 yards. These later Carbines were carried by Volunteer troops, as late as 1860. This particular weapon, has an o/a length of 31", and a barrel length of 15-3/4". The metal work is to a speckled grey metal patina, with a 2 leaf rear sight, and a small bladed foresight. The lock is similar, with some minor pitting, and a VR Crown. The Dolphin hammer is in good condition, and colour of age, with a strong action to half and full cock. There is a standard captive swivel rammer. There is a complete saddle ring on an original slider, to the LHS. The forecap, trigger guard and butt cap are in brass. The original one piece walnut stock has an Enfield Roundall to the RHS, dated 1849. There are dings and bruises commensurate with age and cavalry use, and to a nice original patina.

A 19th CENTURY SNIDER 3 BAND RIFLE. A very good example of this popular rifle, in .577 caliber, single shot metallic cartridge. There is a standard 39" round barrel, with a vg bore, and clear rifling. The finish is now to a fine, plumb/blue smooth patina, with no pitting. There is a type 2 breech. There is a standard rear ladder sight, 2 sling swivels, and an original clearing rod. The lock plate is stamped.."Tower 1859" plus Royal Cypher. Action is strong and sound, and there is a protector to the firing pin, retained with a metal chain. All brass work is original, and in vg condition. The original one piece walnut stock is in vg condition, with no cracks, and only minor dings and bruises of age, and now to a very pleasing patina. The RHS butt stock is stamped with a roundall...."Thomas Turner", who was a prolific maker of weapons for the military. Complete with an original 19th century leather sling.

A 19th. CENTURY MARTINI-HENRY MK 11 MILITARY RIFLE. A nice example of a British military Martini-Henry Service Rifle, manufactured by B.S.A.Co, which is stamped to the receiver, as is the Royal Crown, "11", with "1" beneath, indicating that this is a true mk11, 1st class, and dated 1889. The barrel is a standard 39" in length, and is now to a plumb/blue patina, with no pitting, and has a vg grade bore. The receiver is also to the same finish, with clear ordnance marks, with only a little wear of age. There is the standard rear ladder sight to 1400 yards, a bayonet bar to the forestock barrel band, 2 sling swivels, a standard M/H clearing rod, and the short underlever, standard to Mk 1, 11, & 111 rifles. The original 2 piece walnut stock has minor dings and bruises, commensurate with age and use, and there is a clear roundall stamped to the RHS shoulder stock, with a central crown, and "London", plus 11 & 1 below. The letters C.T.H.and 595 are stamped to the rear of the roundall in small script, and there are double facing WD arrows, indicating "sold out of service" after a life in the army. The stock is to a pleasing patina/colour of age. Overall there are numerous Ordnance stamps, and inspectors marks to the metal work, as are to be expected on a service rifle. There is a later leather sling, included in the price, but original MH leather slings are available at extra cost. [poa].

A 19th. CENTURY PERCUSSION 60 BORE SINGLE SHOT RIFLE. A nice compact single shot percussion rifle, with a 22" octagonal barrel, now to a plumb light brown patina, with no pitting, and a multigroove bore, with clear rifling, and no pitting. There is a quality one piece walnut stock, with a flame effect grain, minor dings and bruises, of age and use. There is a single small rear "V" sight. There is a Dolphin style percussion hammer, to a plain side plate. Complete with an original wooden rammer. The o/a length is 38". C 1860

A 20th Century Cased "Amsler's Planimeter" Manufactured in metal by "Dupa", Germany. Length 8-3/4", in it's fitted morocco leather bound case. In o/a excellent condition. A more "modern" 20th century example of this instrument, C1930. These instruments were used by cartographers to measure irregular areas on maps, eg the area of a field.

A 2nd W.W. BRITISH OFFICERS MARCHING COMPASS. An example of a Mk 111 instrument, widely issued to officers and NCOs. Made of a brass base, finished in standard black paint, now to a nice patina of age, with only slight wear to edges and the base. The hinged metal lid has a glass observation area inserted, with a central viewing line, and 2 armoured metal arms for protection. The main fluid filled body has a M.O.P rotating dial, with degree graduations etc, viewed through a hinged prismatic lens. There are no bubbles present. There is a rotating bezel to the periphery, with a locking screw. The reverse is stamped: chc/C No 12273C Mk 111, dated 1943, and a WD arrow. The edge/circumferance is graduated in the points of the compass. There is also an anti slip ring to the base. Complete with a hinged finger ribbon. Carried in a webbing belt case, signed "Bagcraft Ltd, complete with belt tab.

A 2nd World War Inspectors Clinometer Mk 111 "Admiralty Pattern" A substantial instrument, with a brass measuring barrel, on a black metal frame, with 2 spirit levels, inscribed " E.R.Watts & Son Ltd, London 1942". Original calibration cetificate, signed, and dated, 1942. Contained in it's fitted wooden case, signed and dated to the lid, which has an acceptable fine crack. O/a vg condition.

A 2nd WW.No 4T .303 SNIPER RIFLE, CASED WITH ACCESSORIES. A very nice example of this sort after 2nd WW British Sniper Rifle, with markings indicating that it is an original weapon. It has the Holland & Holland conversion mark "S51" on the bottom edge of the shoulder stock. The letter "T" to the LHS , and "S" to the RHS breech area. The wrist band is stamped M47..indicating Shirley manuf', dated 1943, and the serial No 68XX to the top of the shoulder stock. The No 32 Scope Sight is inscribed Mk1, 1941, with the same serial No. 68XX. The scope is in excellent working order, with Mk 1 type turrets for adjusting elevation and deviation. There is the standard leather eyepiece/objective cover. It's tin case, has the same No.68XX to the interior of the lid, with label, and adjustment tool. It is stamped to the outside: "Bel Case STG TEL 1941. There is a serial No to the exterior B30XX, which matches the serial No stamped to the top of the original carrying chest. The chest has all the necessary markings, a central carrying handle, and instructional label to the lid interior. The rifle is complete with original scope mounts, rear battle sights, numerous ordnance marks, a "Garand" type leather sling, with brass claws. There is also a cheek piece. Overall, the rifle is in vg condition, with magazine, and moving bolt. The accoutrements consist of an original webbing ammunition roll, with compartments containing several clips of properly deactivated, inert 303 rounds. There is an original webbing cover to go over the scope. There is also a standard "Scout Regiment" observers telesope, although this example is in not very good condition, but original. To complete the outfit, there is a netting face veil, and an original webbing gun slip, with the makers name, and dated 1942. This rifle is deactivated to Home Office regulations, with a Certificate of Deactivation. Altogether, a great collectors prize, or to complete a re-enactment groups required equipment.

A Brass Boat Compass A Brass, liquid filled, 4" diameter compass, on a brass gimble, mounted on an Oak base. Unsigned. C1945 Fine condition

A Brass Ships Log, by Walker. A brass spinner, inscribed with Walker motifs, etc, together with a brass Gauge with a white dial face displaying the various measuring gauges, with the Walker name. All connected with white marine rope, and mounted on a Teak base, for display purposes. 14-3/4"x 7-3/4". Laquered finish to brass. Fine condition. C1930

A BRITISH BRUNSWICK RIFLE, THIRD PATTERN. The 3rd Pattern Brunswick was manufactured in England from 1864 on contract to the London Small Arms Company, by the Indian Government. The 3rd version is almost identical to the 2nd Pattern, used by the British Army from 1847 until 1851...when it was superceded by the Minie Rifle. The 3rd Model used a slightly larger diameter belted ball of 0.72", instead of 0.704". The o/a length is 45-3/4", with a barrel length of 30", rifled with 2 angular broad grooves, making one turn in the length of the barrel. The bore is somewhat pitted. The lock is marked..."L.S.A.Co" and dated 1870, and is Ordnance marked to the Indian Army [ Broad Arrow over "I" ]. The lock from the P1853 was used . There is the standard rear leaf sight, sling swivels, brass Patch box, correct clearing/rammer rod, and bayonet bar. The one piece walnut stock is in o/a good condition, with dings and bruises commensurate with age and use. There is an unreadable arsenal roundall to the LHS of the butt. The percussion action is sound. Please note that very few examples of Brunswick rifles, of any of the 3 patterns, are now found for sale, as they were issued in very small quantities....only 11000 were in service by the British and Colonial Army throughout the world.

A British Martini-Henry Volunteers Rifle A superb rifle, Inscribed " Braendlin Armoury, London, Birmingham". Mk11 or Mk111 shape. Barrel has 95% original blueing, vg grade bore....450/577 calibre, with bayonet bar. Superb 2 piece varnished [original] walnut stock, with the "Braendlin" stamp to the shoulder stock. C1880

A BRITISH MILITARY, PATTERN 1853, RIFLE-MUSKET..2nd MODEL. This is a fine example of this muzzle loading Percussion Rifle, in .577 cal,and is in o/a very good condition, with the finish to the 39" barrel, now to a pleasing pumb/blue patina, with no pitting. The 3 solid barrel bands are secured by springs, let into the forestock, ahead of each band....typical of the 2nd model. The receiver is marked "Enfield", 1862, and with the VR Cypher. The one piece walnut stock is in vg condition, with only minor dings to the nicely patinated original finish. The bore is vg., rifled, with 3 grooves. The backsight leaf is to 1000 yards. This rifle comes complete with the correct 2 sling swivels, and rammer rod. This type of rifle was used widely in many world conflicts by the British Army. Many were also sent out to the USA, to be used in the American Civil War. Later, many were converted to Snider Cartridge.

A CASED 19th CENTURY US SHARPS 4 BARREL RF PISTOL. A vg example of this US "Derringer" 4 barrel small pistol, Model 2A, measuring o/a to 5-1/4". In 30 cal rim - fire, the barrels are in vg condition, with a high % of blue finish, no pitting, and vg grade bores, with clear rifling, and only minor stains. The brass frame is clearly stamped to the LHS..."C.Sharps & Co Philada.P.A.", and to the RHS, "C.Sharps Patent 1858". The barrels are released by a button under the frame. The action to all 4 barrels is tight and sound. The grips are in checkered hard rubber, with little wear. The serial number, stamped to the frame, beneath the grips, is 19426, of a total number manufactured of 26500. Contained in a later, fine quality mahogany case, fitted to the T1 Sharps design, relined to the main body, and probably earlier lining to the lid interior, with a brass escutcheon to the key hole [ no key]. There is an ebonised handled, turn screw, in a fitted compartment. Case measures:.....7-1/16" X 4-5/8" X 2-1/4". C 1870

A CASED 19th CENTURY PERCUSSION BELT PISTOL BY "BLISSETT". A single shot percussion pistol, with an o/a length of 10-1/2". The 6" octagonal barrel is inscribed to the top flat: "John Blissett 322 High Holborn London". There is no original blueing, and the finish is now to a light grey patina of age, with some minor areas of slight pitting. The frame is engraved, and there is a belt clip to the LHS. The Dolphin shaped percussion hammer strikes an intact nipple. The action is strong. There is a captive swivel rammer. The grips are in fine checkered walnut, with a vacant escutcheon to the rear. The butt cap opens to reveal a cap chamber. C1850. Contained in a later, mahogany veneered case, fitted and lined, with various accessories, including a powder flask, nipple turn screw, and cap tin. There is a makers label to the inside of the hinged lid. The lid is retained by a working lock and key. The case measures.... 13-1/2" X 8" X 2-1/2"., and is in generaly o/a vg condition, with shrinkage cracks to the base, and a small repair to the bottom LHS corner. An affordable outfit at under £1K.

A CASED 32 Cal. RIM FIRE TRANTER REVOLVER. This is a vg clean example of a 6 shot .32Cal. Rim Fire Cartridge revolver. The o/a length is 8", with a 3-1/2" Octagonal barrel, and "Tranter's Patent" to the LHS breech. Finish to a plum/blue patina, with no pitting. Bore is good. Action to half and full cock, crisp and tight., actioned by a sheathed trigger. The 2 piece walnut grips are in vg condition, with no splits or cracks. Contained in what appears to be an original fitted and lined burr walnut, veneered case. The case is in vg condition, with an inlaid brass escutcheon to the lid, as there is also to the key hole [ no key ]. The open case reveals, several lidded compartments, one with a cartridge tray, another containing a white metal oiler [ well patinated]. There is an ebonised handled turn screw, and a metal clearing jag.. An overall attractive outfit, manufactured C1875

A CASED 54 BORE BEAUMONT ADAM PERCUSSION REVOLVER. A fine and complete cased outfit, of this definitive British Officers revolver, of the Indian Mutiny period, with a 54 bore barrel and 5 shot cylinder. With a 6-1/4" sighted octagonal barrel, inscribed with the makers name: "Wilkinson & Son Pall Mall London", and proof marks, and with a rifled bore that is in excellent condition. The frame is finely engraved, as is the trigger guard, butt cap, and muzzle. To the LHS is a "Joseph Brazier Patent", hinged rammer. The serial number 29749, is stamped to the RHS frame, and there is a sliding safety catch. There is a high % of original finish retained, at about 85%. The single and double action, to the 5 chambers is sound. The original one piece walnut stock is finely checkerd. Contained in a fitted, green baize lined, mahogany case, with a full set of accessories, including a bronze 54 bore mould, with a matching serial number to the revolver, oiler and bag flask by James Dixon, Nipple Turnscrew, Turnscrew, both with ebony handle, a Clearing/cleaning rod, with worm screw, cap tin, and bullet heads. The case measures: 14-1/2" X 7-1/2" X 2-1/2", and is in vg condition, no splits, and to a nice patina of age. There is a "Wilkinson" trade label to the lid interior. C1858

A CASED MODEL 1851 ADAMS PERCUSSION REVOLVER. A fine example of this double action, 54 bore, 5 shot percussion revolver. With a 6-1/2" sighted octagonal barrel, with an excellent rifled bore. Stamped to the top of the barrel: "Deane Adams & Deane No 50 King William Street, London Bridge". Engraved to the RHS frame is "Adams' Patent No. 13794", repeated to the cylinder. There is fine engraving to both sides of the frame, the trigger guard, muzzle end, and the opening butt cap lid. There is approx. 80% retained original finish. The double action is sound. The one piece walnut grip is finely checkered. Contained in a fine Oak Case, with green baize lining to the compartments, measuring; 14-1/2" X 7-3/4" X 2-1/4". Complete with original accessories, including a bronze 54 bore mould, with "Adams" patent stamp, and 54 bore mark. A James Dixon bagflask, an unmarked, but original oiler, a cleaning/clearing rod with worm screw. A cap tin, and "tailed" 54 bore bullets. An original Nipple turn Screw, and Turnscrew, both with ebonised handles. The Oak case is in vg condition, with no splits, a hinged lid, with a makers trade label. There are brass eschutcheons to the lid and key hole face.

A CASED PAIR OF 19th CENTURY PERCUSSION POCKET PISTOLS. This set consists of a matching pair of small pocket, single shot, percussion pocket pistols, length...5-1/2", each, with turn off smooth bore barrels, of 1-5/8" length. The mechanism is boxlock, with the dolphin shaped hammers stricking original nipples. The silvered frames are engraved, and inscribed "Spencer", and "Lynn". There are proof marks to the underside of each barrel, and a concealed trigger, activated by cocking the hammer. The hand stock grip is rounded, fine chequered wood, with vacant white metal escutcheons to the rear. Each action is tight and positive. Contained in a close fitted, and lined mahogany case, together with mould, flask, cap tin, and barrel turn screw. The case is in very good condition, with no splits dings, or chips. There is a lock, with a brass escutcheon, but no key, and an inlaid brass plaque to the lid exterior. The case measures 26-1/2cms X 16cms X 6cms...... C 1850

A Cased Pocket Set Of Drawing Instruments Consisting of 11 original instruments, in a single lined, fitted tray, together with a circular metal protractor within the lining of the lid. All contained in a morocco leather bound case in vg condition, measuring: 7-1/2" X 5"X 1". C1910.

A Cased Proportinal Compass/Divider. Instrument made of metal, length 9", with clear numerals, tabulations and inscriptions. Contained in it's original fitted morocco leather bound case, o/a length 10-1/2". In fine o/a condition. C1930

A FLINTLOCK LIGHT DRAGOON PISTOL BY "DURS EGG" LONDON. A example of a Volunteer's issue Light Dragoon flintlock pistol, with an o/a length of 15-1/2", with a round barrel length of 9", which is of 16 bore. The barrel is to a silver/grey patina, with speckling of age, and inscribed to the barrel top: "D.Egg. London N26" There are 2 private proof marks. The lockplate is clearly inscribed with a Royal Crown and "GR", and "D.Egg" to the tail end of the plate. Again, to a silver/grey patina, with speckling. The Swan Neck Cock actions to a tight half cock, and a less positive, but working full cock. There is a working Strike plate, and Frizzen. The one piece walnut stock has wear, dings and bruises commensurate to age and use, and is now to a nice dark patina of age. The trigger guard, it's tangs, and the butt cap are in brass, as is the single rammer pipe below the forestock. There is a single wooden rammer. C 1780

A GEORGIAN NAVAL TELESCOPE A fine example of a British Naval hand held telescope, manufactured in brass, with the main body bound in quality fine leather, with one single draw tube. The o/a length when extended is 36", and when closed..20-1/2". There is also an extendable sun shield at the objective end. The objective is 1-1/2" diameter, complete with an original removable brass cover. The eye piece has a sliding lens protector. Inscribed to the draw tube , in Italics: "Dollond London Day or Night Sold by C A Canti Town Malling Kent" The brass work is in vg condition, with no dents or dings, the leatherwork is intact, with areas of minor scuffing of age and use. The optics are excellent. C 1800 - 1820 There is a later wooden display stand

A late 19th Century Anaeroid Barometer. All brass construction, in the form of a rotating Ships Wheel, mounted on a brass oval shaped base. Circular white/silvered dial, inscribed: "Chadburn & Son, 71 Lord Street, Liverpool". Glass cover to face of dial. Adjustment Screw to the rear. O/a height: 6-1/2" to 7-1/2" In o/a excellent original condition C1885.

A Late 19th Century Cased "Amslers Planimeter" An unsigned example, made in metal, 9" length. Contained in it's original fitted leather bound case, o/a length 11-1/4". In fine o/a condition. C1890

A Late 19th Century Cased "Amslers Planimeter" Manufactured in metal, and signed "J Amsler". Length 9-3/4", in it's original fitted morocco leather bound case, o/a length 11-3/4". In fine o/a condition. C1890

A Late 19th Century Cased Students Monocular Microscope. Manufactured in brass and black enamelled finish, with a push-pull machro adjustment, and a screw type fine focus. Complete with 2 cased objective lenses, 1 eyepiece, a live box, insect holder, mirror,glass slides in a drawer, adjustable diaphragm,Bulls eye on a stand. There is an inset ivory plaque within the case, inscribed: "Arnold & Son, West Smithfield, London" The brass cases of the lenses are also inscribed "Arnold". In vg condition, and working order. Contained in it's original fitted mahogany case, complete with, lock, key and carrying handle. C1890

A Late 19th Century Cased Students Monocular Microscope. Manufactured in brass, with a black enamelled horseshoe shaped base, rack & pinion focus, signed: " J.W.Watson, High Holborn, London". With 2 objective lens brass cases, but only one lens, 1 eyepiece, Bulls Eye with stand. In working order. Contained in it's original mahogany fitted case, complete with a lower drawer with glass slides, lock& key, and carrying handle O/a very good condition. C1885

A Late 19th Century Cased Students Monocular Microscope. Brass construction on a black enamelled horseshoe base. Signed: "A. Frank Ltd, Manchester" . With one brased cased objective lens, one eyepiece, live box,insect holder. In it's mahogany fitted case, with brass catch closure to the door, brass carrying handle. The lower drawer contains glass slides. O/a vg condition, and in working order. C 1890

A MIDSHIPMANS "OFFICER OF THE WATCH TELESCOPE". A superb example of this popular type of hand held telescope, manufactured in brass, with the main body tube bound in very fine quality, stitched leather. The single pull draw tube is to a pleasing polished white metal finish, and is inscribed: "Heath & Co Ltd Makers to the Royal Navy Crayford London 8330" WD Arrow. The eypiece has a protective sliding shutter. There is a sliding sunshield to the 1-1/4" objective lens, also to a polished white metal finish. The o/a length closed is 18", and 24" when extended. The optics are excellent. C1900 Complete with a later wooden display stand.

A PAIR OF 19th CENTURY POCKET PERCUSSION PISTOLS. A pair of trade pistols, manufactured in Birmingham, with turn off steel barrels, and proofs to both pistols.....approx 80 bore, made on a brass frame, inscribed..."Carr & Cooper". They are a conversion to percussion, from the original flintlock, so were originaly made C1810, and converted C1840. Both have slab sided walnut grips. Both have working safety catches, and the brass frames are engraved. O/a condition vg, and both are in working order.

A PATTERN 1821 ROYAL ARTILLARY OFFICERS SWORD. This is a very fine example of a 3 bar hilted Royal Artillary Officer's sword. The blade is in exceptional condition, with no blemishes or stains. The o/a length is 40", and the blade 34-1/4". Manuf' "By Appointment Henry Wilkinson Pall Mall London" to LHS of blade recasse, and Star Proof Mark to RHS. There are other very clear, motifs, scrolls, "Royal Artillary Ubique", Victorian Crown, with "Honi Soit Qui Mal y Pense". There is also the owners initials in elaborate letters, [CEH], with the word "Through". The serial number 14378 is to the top edge of the blade. Wilkinson Records show that this was a "Medium Royal Artillary Sword". It was "Proved" on the 4th May 1866, "Mounted" 23rd May 1866. It was sold by Wilkinson Sword Ltd, on the 3rd July 1866,to "C.E.Hamilton Esq". Further research reveals, that the crest is that of the Duke of Hamiliton family. The word "Through" indicates that it is for the Hamilton side of the family, rather than "Jamais arriere", for the Douglas side of the family. Further research is being undertaken, to see if there is any more information about the owner of the sword, C.E Hamilton. I have a copy of the actual entry into the Wilkinson Sword Records, of Serial No 14378. The 3 bar hilt is sound, without damage, as is the wire bound shark skin grip. The steel scabbard has very minor superficial speckling/pitting, 2 minor dents, and 2 ring hangers. O/a, a superb example, with one of the best blades that I have seen. C 1866.

A PATTERN 1856 YATAGHAN SHORT RIFLE BAYONET. This example is complete with it's scabbard, and has matching numbers, both to the Quillon, and to the top of the scabbard. The blade has a Fuller, and is in vg condition, with no pitting. To the Ricasso, is stamped on the RHS a WD mark with Arrow, an inspectors mark, and "sold out of service" double WD arrow. To the LHS, the Royal Crown over VR. To the top flat of the blade, an inspectors mark. To the RHS of the Quillon.... 1153. The hilt grip is in vg slightly worn condition. The Pommel release catch is in working order.. To the top metal tang is stamped..."R.J" and "GWL". The original leather scabbard is in vg condition, with no apparent splits, sound stitching, and some wear of age and use [ only minor], and stamped WD over arrow, inspectors mark, and a matching number to the quillon...1153. The steel mounts to the scabbard have speckling, and staining of age. To the LHS mount is a "Frog" stud. This type of bayonet was issued to Sergents carrying the 2 band, Snider/Enfield, Short Rifle.

A PATTERN M1858 YATAGHAN SWORD BAYONET FOR THE M-H RIFLE. This is a variant of the bayonet made for the Snider Short Rifle, and bushed down for use on the Martini Henry Rifle. With a standard 575mm blade, this example in vg condition, with little evidence of damage, pitting, or staining. Clearly dated "85", Royal Cypher, WD mark, and inspectors mark. The grips are worn, but intact, and the pommel button working. The leather scabbard is intact, with sound stitching, and iron mounts, now to a dark patina. The bushed examples, for use with the MH rifle, are now very hard and difficult to find.

A RARE 19th.CENTURY LEATHER, SADDLE CARBINE BOOT. A very difficult to find, and rare, US Civil, or Indian War Saddle "Boot". Made in leather, still in vg condition, with sound stitching, no splits, cracks, and only minor scuffs of wear. Now to a pleasing black finish. There is stamped "Rock Island Arsenal" to the back aspect, now begining to fade, but still legible. There is a brass mount to the top front of the holster. There are two leather saddle straps, both with metal buckles. Note that the lower strap has lost a few inches of it's length, but does not affect the o/a appearance. The type of Carbine carried, would be, amongst many, The Sharps, Spencer, Springfield etc, although the "Rock Island Arsenal" stamp would indicate a Post Civil War issue, where Spencer, and Springfield Carbines were widely used in the Indian Wars This is only the second one I have ever possesed, as the great majority were lost, destroyed, or deteriorated beyond help. C1865 - 80

A SINGLE SHOT FLINTLOCK POCKET PISTOL. An early 19th century boxlock, flintlock, pocket pistol, with an o/a length of 7", with a turn off round barrel [ now seized], of 2-3/8". The lock is inscribed to the LHS...."Gardner", and to the RHS...."Newcastle" There are London private proof marks beneath the barrel. There is a ring neck cock [with a flintstone], and a hinged strike plate, above a powder pan with oriface for ignition. The action to both half and full cock is tight and positive. There is a sliding safety to the half cock position, and a full trigger guard. All metal work is to a smooth,dark grey patina, with no pitting. There is a slabsided walnut grip, in very good condition. C1810

A SMALL POCKET FLINTLOCK PISTOL. A flintlock. boxlock pocket pistol, probably of French origin, with an o/a length of 5-7/8", and barrel length of 2". All metalwork is to a silver/grey patina, with light engraving to both sides of the lock, and trigger guard. There is minor stain/speckling of age. The one piece walnut stock is to a bulbous round section shape. Action is strong to full cock...there is no 1/2 cock action. C 1810

A SMALL SINGLE SHOT, FLINTLOCK POCKET PISTOL. A small neat flintlock pocket pistol, with an overall length of 6". The rounded metal barrel, with a turnoff section [ now seized] of 1-1/2" length, is now to a grey/plumb brown patina, with an upper and lower tang. There are two proof marks to the lower aspect of the barrel. There is a boxlock-flintlock mechanism, with a ring necked cock, actioning to half, and full cock, to a single strike plate, above a single hole flash pan. The concealed trigger, actions at full cock. There is a sliding safety to the half cock position. The rounded section walnut grip/stock, is finely checkered., with a white metal eschuteon to the rear [ now stained]. C1800

A SUPERB PAIR OF CASED JOHN MANTON DUELLING/TARGET PISTOLS. This is an opportunity to purchase a very fine pair of John Manton Duelling/Target Pistols, which rarely come onto the market. They were made in 1809, s/n 5179, originaly as Flintlocks, and later converted to Percussion, at a date unknown, but probably C1830. They are almost unique in that they both have 10" extra heavy octagonal barrels, with "Secret" hair rifling, not rifled to the muzzle. This was done so that when a duel was about to take place, it was not obvious that the bore, which should have been smooth, was in fact rifled. Bore lights did not exist then..!!! The bores are very good. Each pistol has a lateral adjustment to the rear sight, dovetailed into gold lined platinum vented percussion breech, and each with fine brass foresights. To the top of each barrel is inlaid in gold lettering: "MANTON-LONDON". The engraved tang retains colour case hardening. The original brass tipped ramrods are retained with steel rod thimbles. The fully detented locks are engraved... "MANTON", with safety, border and scroll engraved, with traces of colour case hardening. The locks have the typical Manton sound when being cocked [ known as "Singing Locks"]. The trigger guards are engraved, with pineapple finial and engraved butt caps. The walnut half stocks are finely chequered, with horn caps, and silver escutcheons to the barrel wedges. These pistols, as said are quite unique, with regard to their weight, and shape of the Butt. The o/a length is 15-1/2". This pair are cased, and it is thought that after their conversion, they found their way to India, and later cased by "Manton & Co", and then sold.... hence the label inside the lid. The accessories consist of a powder flask, cleaning rod with worm screw, and a 42br mould, which would cast balls to fit the 38 bore of these pistols. There is also a Silver Pocket Watch, hallmarked 1827, and signed "Manton London". It is probable that this was added to the case at a later date, by an owner who wanted to keep his watch safely. The case is in Mahogany, having had some restoration, and relined at sometime to the fitted interior, and o/a is in very good condition.

A US 5 SHOT 32 CAL RF POCKET REVOLVER. A very attractive example of these late 19th Century Rim Fire cartridge pocket revolvers, which were produced by the thousands, and had many evocative names. This one is inscribed "Dictator" to the top strap, which also bears "Pat.May 27 79". The barrel is 2-1/4" in length, is octagonal, and finely engraved. The solid frame is also finely engraved, with attractive, swirl designs etc, and the cylinder has 2 encirlining fine bands of engraving. The Gutta Percha Grips are chequered, with floral motifs. Action to both half and full cock is sound. The bore is surprisingly good, and it is likely that the gun has had little use over the last 120 years. O/a length..6-3/4", and the o/a condition excellent. C1882

A US MODEL 1860 SPENCER CARBINE. An excellent example of this innovative weapon, that was widely used by the US Cavalry with great effect in the Civil war, and later in the early years of the US Indian Wars, and by trappers, and frontiersmen. It has a 22"round barrel, with a high % of blued finish, no pitting, and a vg 3 groove bore, with little in the way of staining or pitting. There is a standard rear ladder sight to 800 yards. This example is one of the original 1860 carbines, that Post-war, were altered by the Springfield Armoury C 1867 to 50 caliber rim fire, and the barrel resleeved from 6 grooves, to 3 grooves. These arms were arsenal refinished, and restocked. Markings were therefore often weak or thin. The logo/patent/address to the top of the breech can be read, but is faint in some parts. There is a saddle bar and ring to the LHS wrist of the stock. The 2 piece walnut stock is in excellent condition, with very minor dings of age and use, and now to a nice colour/patinated finish. There is a sling swivel to the underside of the butt. The underlever action is smooth, the hammer action strong to 1/2 and full cock. The butt magazine follower has a vg spring mechanism. The receiver is to a nice patinated plumb colour, with no pitting. These post war altered weapons were also fitted with a "Stabler cut off" device [ This allowed single shot use, as well as the normal 7 shot repeater action]. O/a a fine example, in great condition, [and are considered desirable as a post war refurbished/altered models]. The serial number....54701 falls well within the range of the 1860 model as they were numbered 11000 to 61000. The US Civil War use of the Spencer Cavalry Carbine, and the rarer infantry rifle, had a profound affect on the outcome of the war, as about 22 rounds could be discharged per minute, as opposed to only 3 or 4, from a muzzel loading weapon. It was much feared by the Confederates, who nicknamed it..."The Yankees 7 Devils".

A US NEW MODEL 1859 SHARPS MILITARY RIFLE. A standard early American Civil War issued infantry rifle, with a 30" round barrel, in .52 cal. The rifled bore is excellent. This is the first of the "straight breech" models produced, in the distinctive capping breech loading system. All the features are present, with many Sharps patent dates, a clear address, and New Model 1859 to the barrel top. There is a ladder rear sight, an iron patch box to the RHS of the butt stock, and two sling swivels. All metal work is now to an attractive, smooth silver/grey patina, and no pitting. There is a single trigger. The two piece walnut stock is in very good condition, with only minor dings of age. The total number made were 6989. with a serial number range of 36000 to 60000. Virtually all were sold to the US Government during the Civil War. Of these 4189 were sent to the US Army, amd 2780 to the US Navy. Two thousand were sent to the US Sharpshooters, under Colonel Hiram Berdan. The serial numbers of these range from 36000, to 57000. Most had double set triggers, and a bayonet lug under the barrel. However, a fair number were equiped for a socket bayonet, with a single trigger, as is this example. However, it is very difficult to prove the exact provinance of any weapon, unless there is definative documentation. The serial number of this rifle is..... 39619 C1861

A VERY RARE US POCKET NAVY COLT .36 CAL REVOLVER. Also known as the Pocket Pistol of Navy Caliber. Manufactured 1861 through to 1873. the serial numbers shared with the Model 1862 Police, and alltogether, 47000, were made, of which 19000 were the "Navy". It is estimated that less than 10k were in percussion, the rest in 38 Rim Fire. This example has a serial number..... 6587....C1862.....all matching. It has a 4-1/2" barrel with a one line address: "Address Col. Sam Colt New York. U.S. America" and..."Colts/Patent" to the LHS frame, plus "36 cal". All metal work to a pleasing grey colour, with no pitting, and traces of original blue. Action/Indexing sound. The rebated cylinder, retains some original Scene. The one piece walnut grips have a high % of retained varnish. As most of this model were converted to Rimfire, very few of the remaining 10k percussion examples, now exist.

A VOLUNTEERS LIGHT DRAGOON FLINTLOCK PISTOL. A late 18th Century example, with a 9" round barrel, in 16 bore, and now to a dark grey patina, with proof marks, and no pitting. The lock plate is stamped with a "crown" motif, and inscribed "Wheeler", and is also to a grey patina, again, with no pitting. The one piece walnut stock is to a dark patina, with evidence, but not obvious, of a repair to the butt stock area. There is a brass mount to the butt, and a plain brass trigger guard. The brass tipped, wooden rammer,is retained by one brass rammer pipe. C1780

A WINCHESTER MODEL 1885 "HIGH WALL" RIFLE IN 450 ELEY CALIBRE. This is a rare to find Winchester Rifle, in a very hard to find calibre of .450 Eley. It has a heavy 30" round barrel, inscribed with the full Winchester address and patents. The bore is very good. The receiver is engraved to both sides with Bison and Bear figures, enclosed in a circular border. The barrel & receiver have been refinished/reblued, to a very high standard, reputedly by an employer of Holland & Holland, apparently in the 1970's. This is almost for certain, when the engraving was carried out. A very high % of this blueng remains, and the engraving clear and sharp. There is a straight grained, 2 piece wood stock, with fine chequering to the wrist and forestock, and with only very minor superficial storage scuffs, and to a superb finish. There is a rear buckhorn sight, and blade foresight. This is a single shot underlever actioned rifle, probably made for an English game hunter, as there are English proofs to the rear LHS of the barrel, and the butt cap is of the straight shotgun design, prefered by the English hunters. O/a, a fine, virtually pristine rifle. The serial number indicates manufacture C1898.

ALLEN & WHEELLOCK CENTRE FIRE HAMMER LIPFIRE ARMY REVOLVER. This is an extremely rare example, made early 1860s, in a total quantity of only about 250. in 44 calibre lipfire. This is similar to the A & W centre hammer percussion revolver, and was actually made prior to the percussion revolvers, even though it is a metallic cartridge. However, Smith & Wesson were able to stop production, as A & W were proved to have infringed the S & W patent. There were no government contracts, but it is considered to be a martial piece. This example is in 44 lipfire, 6 shot round cylinder, with notches for cartridge lips at the rear wall. There is a 7-1/2" half round, half octagon barrel, with foresight. The bore is bright with little evidence of pitting, and good rifling The entire revolver is to a no finish, pleasant, grey metal patina, with no pitting.. Inscribed to the LHS barrel, albeit very worn and faint is: "Allen & Wheelock, Worcester, Mass. US/Allen's Pat's. 7, Nov.9, 1858". The single action is strong, and indexes sound, and tight.. There is a hinged loading gate to the rear of the cylinder RHS. The 2 piece Walnut grips are original, and in vg condition, wyth minor dings and bruises of age and use.

An "Imperial/Metric" 18" Cased Rolling Rule". Inscribed, "G.Rowney, London", and with the possible retailers, or even the owners name, "T.Crane, Wakefield", also inscribed. The brass is in it's original untouched condition, with some minor staining, and speckling. Contained in a fitted polished hardwood case, in vg condition, o/a length, 19". C1870

AN 18th CENTURY PISTOL, CONVERTED TO PERCUSSION FRM FLINTLOCK A nice example of an 18th Century Volunteers Light Dragoon pistol, originally a Flintlock action, C1790, and later converted to a Percussion Action later in it's life, C1845. In nice condition, with the barrel to a grey metal patination, with proof marks,and the lock inscribed "Hawker". The original one piece walnut stock, shows minor dings and bruises, commensurate with age and use. Complete with a removable rammer. This is a way for the collector to acquire a piece of militaty history, at an affordable price.

AN 18th CENTURY VOLUNTEERS LIGHT DRAGOON FLINTLOCK PISTOL. A original, and clean example of a Volunteers pistol, made by "Rea & Son", which is inscribed to the lock plate. The o/a length is15", with a round barrel of 9". There are proof marks to the barrel. There is a Swan necked cock, with what appear to be original parts, Frizzen and Pan. All iron metal work is to a nice grey metal patina, with no pitting. The barrel is a 16 bore smooth bore. The one piece walnut stock is in o/a very good condition, with minor dings and bruises of age and use, and to a pleasing patinated finish. There has been a minor repair to the RHS stock, next to the trigger guard. This was done to eliminate 2 minor stress cracks, and has been carried out expertly, and invisibly. Action to half and full cock, is sound and crisp. There is a brass trigger guard and butt cap. The original rammer is brass tipped. These volunteer issued pistols were of a superior quality to the standard ordnance issue. Note, that Rea & Co, flourished in Southwark, London, were well established at 21 Minories, Southwark, in 1794.

AN ENGLISH SINGLE SHOT PERCUSSION POCKET PISTOL. This example has a 1-3/4" turn off, smooth bore barrel, with an o/a length of 6". The frame is engraved, and there are proof marks to the frame and barrel. The Dolphin shaped percussion hammer has a very strong action, both at half, and full cock. There is a sliding safety, and a concealed trigger, which deploys when the hammer is cocked. The grip is of a curved and rounded shape, and is one piece, and of finely checkered walnut, with a vacant white metal escutcheon on the back. C1845.

An RAF Engineers Target Clinometer Mk 6 A working instrument, inscribed "Avimo", in it's fitted wooden case, marked RAF 1961, measuring 71/2" x 61/2". Good condition.

An unusual English Binocular/ Black morocco leather, bound to black enamelled finish to brass construction. Central focus adjustment. Inscribed: "Aitchison London" x8 An unusual lens system, vg optics. Original leather case [ lid closing strap missing]. O/A good condition

British Binocular Periscope Mk 2 Twin Turrets in a polished white metal finish, individual eye focus, intra eye adjustment, lens sun shields. Contained in it's original olive painted metal case. C 1950

British Binocular Periscope Mk 2 A Fine condition twin turret instrument, in it's original olive green painted finish. Individual eye focus, intra- eye adjuster, sun shields. With it's original olive green painted metal case. There is an adjustable brass mounted wooden tripod, with brass mounts for the periscope. Tripod adjusts: 36" to 60" C1950

BRITISH MARTINI-HENRY MK 1 RIFLE "ENFIELD" 1874. This is a rare, early issue British military Martini Henry service rifle...Mk 1 type 3 issue, in it's original 450/577 calibre. The receiver is stamped with the Royal Cypher, "Enfield" 1. 1874 The shoulder stock stamped with a clear "Enfield" 1 within a roundall, plus another roundall with Vic/Gov, indicating issue to commonwealth troops in Australia. The overall condition of the 2 piece walnut stock is vg, with minor dings and bruises, of age and use. There is evidence of dark staining to the very end of the shoulder stock, which examination shows to be only cosmetic, and the wood is sound. This often happens in this area as the rifle stands for most of its life upright, on the ground, or on a gun rack. The number 442 is also marked on the shoulder stock, which is repeated on the lower aspect of the foreend of the trigger assembly. The 39" barrel exhibits a pleasing plum to blue patina, with no pitting, ordnance marks to the LHS, as are all other essential metal parts. The bore is very good, and the action sound. The Type 3 mk 1, had various upgrades carried out, including the changing of the main receiver pivot from phosphour bronze, to steel, the removal of the rear shoulder stock sling swivel. This rifle is complete with a rear sight to 1400 yards, a trigger and forend sling swivel, a serrated buttcap, a bayonet bar, and a later Mk 11 clearing rod.

BRITISH NAVAL LONG SEASERVICE FLINTLOCK PISTOL. A classic of British Naval history, with a 12" round barrel, with proof marks, now to a pleasing gray metal patina, with minor dings and stains of age and use. The o/a length is 19". The side plate to the RHS is ordnance stamped "Tower" and Crown over "GR". There is a ring necked cock, with a strong 1/2 to full cock action. To the LHS is an original metal belt clip. There is a full one piece walnut stock, with dings and bruises of age and use, but in o/a pleasing condition, and patina of age, and no obvious cracks or damage. There are no apparent ordnance marks to the stock, but they may well have been erased over time. The trigger guard, tangs, and butt cap, are in brass. There is a brass tipped wooden rammer, retained by a brass pipe. C 1800

BRITISH PATTERN 1796 INFANTRY SWORD. A nice, standard example of this classic British military sword. The 31" blade is complete, without edge jags or defects. There are very faint traces of the various insignias to the blade, which is now to a grey metal patina, with some unobtrusive stains, and no pitting. The Brass Quillon is in good order, but the central pinnacle is missing [ very common ]. The grip is bound with original white metal wire, in good condition. The brass guard and pommel are in good order. Complete with it's original leather scabbard with brass mounts, and a hanger ring. This is in very good condition for it's age.

CASED PAIR OF PERCUSSION MUFF PISTOLS BY DURS EGG. A desirable pair of elegant percussion Muff pistols, each measuring 5" o/a length, with turn-off octagonal barrels, each 1-1/2" in length. The Box- lock Dolphin style hammers activate concealed triggers, and work to 1/2 cock, and full cock, each action tight and strong. There is a sliding safety catch to each pistol. The engraved lock frames are inscribed: "D.Egg" to the LHS. All metal work is now to a pleasing silver gray patina, with no pitting. The one piece walnut butt stocks are finely checkered, with a vacant white metal eschutcheon to the rear. Presented in a finely fitted, and green beige lined, mahogany case. There is a 120 bore mould, elegant copper powder flask, a barrel turn key, cleaning brush,and an original key, to the working lock [ brass eschutcheon plate to lock missing]. The case is in excellent condition, with minor bruises of age, and no splits. The original lining is in vg condition, with wear commensurate to it's age. The case measures: 6-1/2" X 6" 1-7/8" There is an inlaid brass plaque to the lid, inscribed: "Captain W.H. Armstrong / Belsize Park / Hampstead" This is worthy of further research. C1845

COLT MODEL 1862 POLICE REVOLVER. A fine example of this relatively hard to find, 36 caliber, 5 shot Percussion revolver. Considered by many collectors as the ultimate in streamlined design by Colts factory, during the percussion period. Total manufactured were in the region of 28000, and the serial numbers were continued with the Colt Pocket Navy to approx serial number 47000. Many of the "Police" were converted to metallic cartridge, so those in their original percussion format, are now desirable. This example has a 5-1/2" round barrel, with a very clear Colt address, and a vg bore, with clear rifling, and a virtualy mirror finish, and only very minor areas of staining. The o/a appearance is now to a very pleasing smooth, plumb blue, metal patina, with no pitting. There is some case hardening on the frame. There is strong indexing to the Single Action, and cylinder pins are still present on the rear of the cylinder [ see photo], indicating that this revolver was little used during it's life. The one piece walnut grips are excellent. Serial Number 32675, C1866, all matching numbers, including the wedge, and to the rear of the cylinder.

DOUBLE BARREL PERCUSSION PISTOL BY "MANTON LONDON". An impressive percussion pistol, with 4-1/2" over & under octagonal barrels of approx 18 bore. There are proof marks on both sides of the middle rib. There are two "Dolphin" shaped percussion side/hammers, each with engraving. The lock plate, to each side is also engraved, and inscribed "Manton London". This is also inscribed to the top of the barrel...now faint, but readable. There are double triggers, within a trigger guard, also lightly engraved. The barrel tang is also engraved. Action to each hammer, both to half and full cock, is tight and sound, to the percussion nipples. There is a single hinged, captive rammer beneath the lower barrel. All metalwork is now to a grey/plumb patina, with very minor, superficial scattered pitting/speckling. The grip/stock is of a rounded shape walnut, with fine checkering, now to a patina of age. There is vacant eschuteon in German silver, to the rear of the grip. C1845

Early 20th Century Field Spotting Telescope A very fine and complete outfit, consisting of: a].. A brass 4 draw tube telescope, leather bound to main tube, leather end caps, and sling. The 4th draw tube is 'Panchromatic'. Inscribed: 'Argos W.Watson' VG optics b].. A folding metal tripod with mounting cradle c].. It's original leather carrying case, with compartments for the telescope and tripod etc. Fine o/a condition C1900 Was probably a private purchase, and carried by an officer/gentleman/shooter

EARY 20th CENTURY CASED "AMSLER'S PLANIMETER". A fine superb condition example, manufd. in white metal, with bone, possibly plastic graduations to the moving wheels/dials. O/a length 6-1/2", with 2 accoutrements, all contained in their lined, fitted case, which is covered in fine "Morocco" leather. The lid is retained with a fine brass clasp. O/a length of the case....9"....................C1900

EAST INDIA CO. SGTS NEW LAND PATT'. SMOOTH BORE MUSKET. This was the standard smooth bored percussion infantry musket, carried by Sgts' of the East India Company, with round barrel, to a plumb brown patination, and no pitting. The bore is smooth, now to a fouled interior, in need of a thorough scubbing.. To the LHS of the barrel, is the inscription: "JPR/EXR/1522". The lock has a Rampant Lion mark, dating it to post 1809. Originally a Flintlock, converted to Percussion while in service. The action to half and full cock is crisp. The original one piece walnut stock, is to a pleasant colour/patination, and there are minor dings and bruises of age and use. There is a sling swivel to the brass trigger guard, and one to the forestock. The lock plate, butt cap, and forecap are in brass. There is no rear sight [ not part of it's design], but there is a small foresight. Complete with it's original iron rammer. This had a shorter barrel than the standard Newland Pattern type Musket and probably saw service in the colonies, and also the Indian Mutiny.

FN MODEL 1910 SEMI-AUTO 7.65mm PISTOL. A civilian issue of this popular pistol, issued C1930-1945. Stamped: " Fabrique Nationale D'Armes, De Guerre Herstal-Belgique Brownings Patent Depose" In o/a excellent original finish/condition, clear marks, original magazine, vg grips, and action.Deactivated to Home Office Requirements, with certificate.

Martini-Henry Military Rifle Mk 11. A complete example of this sort after British Military Service rifle, with a standard 39" barrel, retained by 2 barrel bands. Now to a plumb brown finish, with no pitting. The calibre is the standard 450/577 metallic cartridge. The receiver is stamped to the LHS: "Crown / Enfield / 1878 / 11"... the 11 is symetrical, indicating that this is a true Mk 11, and not an uprated Mk 1. The receiver is to a plumb brown/gray finish, with areas of speckling.and no pitting. There are the standard fittings of rear ladder sight, blade foresight, bayonet bar, and 2 sling swivels. Complete with an original clearing rod. The 2 piece walnut stock shows signs of wear, dings, bruises, of age and use, but is in o/a good condition, now to a pleasant dark patina of age. There is an Enfield Roundall stamped to the RHS shoulder stock. The underlever action is sound. The bore is in o/a vg condition, with clear rifling [ NB...the are 2 minor defects about 3 "from the muzzle]. All necessary metal parts are fully ordnance marked.

NEW LAND PATTERN FLINTLOCK MILITARY PISTOL. A fine, clean example of this classical British military flintlock pistol. Issued to the Cavalry, particularly during the Peninsular War, C 1806. With a standard 9" round barrel, of 16 bore, showing 2 clear proof marks. The barrel is now to a pleasing grey patina, with only very minor speckling, and no pitting. The sidelock to the RHS, is clearly stamped "Tower" to the tail, Royal Crown over GR, and ordnance stamped. There is a standard ring necked cock, a raised pan, original jaws to the cock [ with a flint], and strike plate. All to a vg grey patina, and no pitting. The one piece walnut stock is in excellent condition, to a pleasing patina, with very minor dings and bruises of age. Mounted with standard brass furniture, and the trigger guard is engraved: "S.S.Y.C / E/2. It is considered that this was originaly an Ordnance pistol, later aquired by a Volunteer unit. These initials probably meant "South Shields Yeomanry Cavalry" The "E" probably ment "Company E", and the figure 2, the pistol number to the unit. There is a standard swivel/hinged rammer. This is one of the best "New Lands" that I have seen.

ORDNANCE NEW LAND [1806] PATTERN CAVALRY FLINTLOCK PISTOL. A vg example of a very sort after sidearm, as used in the Peninsular Wars, and at Waterloo. The brass butt cap is marked: "11 E HR KLG", and "K/11" on the brass trigger guard. These are the markings of the Hussars Regiment of the light cavalry of the Kings German Legion. They distinguished themselves both at Waterloo, and earlier, in the Peninsular campaign. This is a particularly rare find as a genuine Ordnance piece, with an interesting military history. The o/a length is 15", with a round barrel length, of 9", which is a smooth bore. 16 bore, with proof marks to the LHS barrel top. The metal is now to a grey speckled patina, with no pitting. The side lock is marked with a Kings Crown over "GR", "Tower", and Ordnance mark. The ring- necked Cock has a stong, positive action, to both 1/2, and full cock. There is a captive swivel rammer, brass butt cap, trigger guard, and forestock cap. The one piece walnut stock has minor dings and bruises, commensurate to age and use, with no apparent splits, and is now to a very pleasing patina of age. C1810

P1856 VOLUNTEER ENFIELD SHORT RIFLE. This is a desirable military type short rifle, of the type and style issued to the elite Rifle Brigade. This example, engraved to the top of the barrel, the manufactures details: "H & G Hackett Birmingham" The finish is now to a thinned plumb /grey metal patina. The bore is 3 groove, and in good condition, [ as favoured by private purchases within volunteer units.]. The lock plate is stamped "Tower 1860". The bayonet fitting takes the long Yataghan sword bayonet. There is a standard rear ladder sight, 2 sling swivels, and a clearing rod. The original walnut stock, is in very good conditin, with minor dings and bruises, commensurate with age and use, and to a pleasing patination.

PATTERN 1853 ORDNANCE ISSUE, TYPE 11 ENFIELD PERCUSSION RIFLE. A classic military issue muzzle loading, single shot, percussion rifle, with a standard 39" round barrel, of .577 calibre, indistinct proof marks, and to a light plumb brown/grey, metal patina. There is a rear ladder sight to 900 yards, with minor pitting surrounding it. The type 11 has spring band retaining springs for the 3 barrel bands. . The lock is inscribed 1856. Tower, with a VR Royal Cypher. There is a Dolphin shaped hammer, and an original nipple guard, chained to the rear trigger guard sling swivel. There is also a forestock sling swivel. The trigger guard, and shoulder butt cap, are in brass. The one piece walnut stock is original, with minor dings and bruises of age and use, and to a pleasing patinated colour. The shoulder stock is Ordnance WD plus arrow marked. This mark is also on the lock. There is the standard 3 groove rifling to the bore, which is good, with only minor speckling and stains. This rifle also has a standard clearing rod/rammer. A Crimean War and Indian Mutiny period Rifle.

Pre-1st World War Military Clinometer In it's original anodized to brass finish, marked "Short&Mason Ltd London 1910 WD arrow. Complete with it's original leather case with sling Good condition

REMINGTON DOUBLE DERINGER .41 Cal. RIM FIRE PISTOL. A fine example of this Double Barrelled O/U Deringer, a.k.a "Model 95 Double Deringer". They were made from 1866 - 1935, with a total quantity of 150k. In 41 rimfire short, 3" round superposed barrels, which tip upwards for loading and extraction. The firing pin switches automatically from barrel to barrel. This is the 3rd Model, identified from the address on the top rib:....."Remington Arms Co., Ilion, N.Y"., and made between 1888 - 1911 [ approx 80k made]. This example is Nickle Plated finish, which is original, and 95%+ intact, and in vg condition. The address is clear, and there is no crack to the hinge. The bore is very good, with rifling, and no signs of pitting. The original checkered hard rubber grips are in vg condition. The action, to 1/2 and full cock is strong and sound. It is now difficult to find good quality/condition examples such as this one.

SMITH & WESSON MODEL No. 3 FIRST MODEL S.A REVOLVER. A rare example of this early 44 cal 6 shot revolver. a.k.a First Model American. This was the first of the "Top Break" revolvers, and preceded the Colt S.A by 3 years. Manufactured 1870 - 1872, in 44 S & W American. Total number made...8000, this one with the serial number: 5402. The round barrel is 8" long, with the top rib inscribed: "Smith & Wesson Springfield Mass. U.S.A. Pat. July 10.60. Jan 17. Feb 17 July 11.65 & Aug.24 69" The entire revolver is now to a no finish grey metal patina, with stains and speckling, and minor pitting, but with an o/a pleasing appearance. The bore is good, with no pitting, and the Single Action indexes tight and soundly. The 2 piece walnut grips are original, and in vg condition. Various well know characters from the American West, carried examples of this revolver, including...Buffalo Bill Cody, Wyatt Earp, and several were used in Custers last stand at the Battle of the Little Big Horn. This is a good example of the type of weapon used in the early periods of the American West.

U.S.A MARLIN MODEL 1893 RIFLE. IN 32.40 CAL. This example has the classic underlever action, with the ammunition port to the RHS of the receiver.It has a 25" round barrel, with a full length tubular magazine. Inscribed to the barrel is "Black Powder", indicating manufacture between 1895 - 1916 [ serial number 425612], and the total number made was nearly 1 million. Inscribed to the barrel: "Marlin Fine Arms Co. New Haven Ct USA/Patented Oct 11 1887 April 2 1889. Aug 1893." To the breech is inscribed: "Marlin Safety". There is a buckhorn rear sight, and a blade foresight. This is basicly a no finish gun, now to a pleasant grey metal patina, with no pitting or staining, and to a nice smooth finish. The underlever action is sound. The bore has rifling, which is now a little worn, but not pitted. and in 32.40 calibre. To the top breech tang is inscribed: "Model 1893". There is a 2 piece varnished walnut stock, in vg condition with minor dings and bruises of age and use.

US CIVIL WAR SMITH CAVALRY CARBINE. This is a superb example of this premier carbine of the US Civil War, manufactured 1861 - 65. It was widely used by Union Cavalry Regiments, including the 3rd W.Va., 1st Conn. 7th, 17th Penna, 6th, 9th Ohio, and the 1st Mass. A 50 calibre percussion breechloader, single shot. This item has a very high % of blue finish to a 21-5/8" round barrel. The bore is to a bright rifled mirror finish. The breech is superb, retaining much case hardening, with a Sling ring mounted to the LHS. Also to the LHS breech is clearly inscribed: "Address/ Poultney & Trimble/Baltimore USA". "Smith's Patent June 23 1857" "Manufactured By Mass Arms Co/ Chicopee Falls" The 2 piece walnut stock is in very good condition, with only very minor dings of use. Virtually the entire production was purchased by the government, and some were advertised by the Civil War military outfitters Schuyler, Hartley, and Graham of N.Y. These examples did not have inspectors markings, this observation often seen in fine condition specimens, such as this one. Total production about just over 30000. Serial Number.......12094.

US CIVIL WAR STARR PERCUSSION CAVALRY CARBINE. This is a 54 calibre breechloading, single shot, percussion carbine, with a 21" round barrel, retained with a single brass, barrel band. The butt plate is also brass. The barrel is to a smooth, plumb/blue, patina, with no pitting. The rifled bore has evidence of wear, with 2 areas of ringed staining/pitting, often found in Cavalry carbines. There are the standard rear and foresights. The breech lock/frame is in vg condition, with no pitting, and to a dark grey patina. All inscriptions are clear......To the RHS lock..."Starr Arms Co/Yonkers N.Y", as is also inscribed to the barrel top. To the top of the rear of the breech...."Starr's Patent/Sept.14th 1858". There is a Saddle ring to the LHS of the breech. The 2 piece walnut stock is vg. with only minor dings and bruises of age, and now to a pleasing colour/patina. There is a faint inspectors cartouche to the LHS wrist of the shoulder stock, and the serial number...18289, is of a total manufacture of 20601, dating it to C1864, and probably a Civil War carbine. It was issued to many Union Cavalry Regts, including the 1st Ark. 5th Kansas, 11 Missouri, and the 24th N.Y.

US COLT No 3 THUER DERRINGER IN 0.41 RIM FIRE. Made 1870 - 1912, total made 48000, a single shot 41 cal RF cartridge. Barrel marking "COLT", and 41cal stamped to the LHS frame. This example is a British proofed, "gamblers" boot pistol, with 100% varnish to the walnut grips, virtually 100% original nickel plating to the frame, and approx 25% original blue to protected areas, and the rest to an attractive plumb blue/brown patina.

US MANAHATTEN .36 PERCUSSION REVOLVER, 1V MODEL. This is a secondary martial revolver, very similar to the Colt Navy 1851 model, and the Colt model 1849. The Manahatten had certain advantages over the Colt, and because of this, it had major success in the number sold. Altogether, the total quantity sold between 1859 - 68, was 78000. This example, of the series 1V, with a serial range from approx 45200 - 69200], has a serial number 45170, manufactured C1864, so almost certainly a Civil War weapon, and probably a private purchase. The octagonal barrel is 6-1/2", and the 5 shot cylinder, shows a reasonable amount of scene ... contained in a number of engraved ovals. The caliber is .36. Now to a no- finish, Silver/grey smooth patina, with sharp edges, a clear 2 line address to the barrel, and a sound action. The wood grips have approx. 95% original varnish. These revolvers are now collected in their own right as a true weapon of this era, and are considerably cheaper than the equivalent Colt 1851 Navy

US MODEL 1853 SLANT BREECH SPORTING RIFLE. This is a rare, and difficult to find single shot, capping breech, 60 Bore, percussion rifle, as only 2970 were made between July 1854 and December 1859. The complicated serial number range of 8000 - 27500 [ other types were included ], together with the fact that this example has a Brass Patchbox to the LHS shoulder stock, and a serial number of 20XXX, indicates that this was made early on in the series. The octagonal barrel is 26" long, and has the logo, "Sharps Manuf Co Hartford Conn", stamped to the top flat, which is now slightly worn. The other logo: "Sharps Patent 1848", is stamped to the top tang. The barrel and receiver are now to a "no finish" grey metal patina, with minor dings and abrasions of age and use. The bore is vg with strong rifling. There is the standard rear leaf sight, and a brass bladed adjustable foresight. The 2 piece Walnut stock, has dings, and bruises, commensurate with age and use, with a repair to the "toe" of the shoulder stock, which is not obvious This type of rifle was used for game hunting, and is the ancestor of the later, Model 1874, metallic cartridge, Buffalo Rifle. This early slant breech type of Sharps was succeeded by the "upright" breech in 1859, which provided a better gas seal. O/a, this is a well used, interesting, and desirable collectors piece.

US REMINGTON NEW MODEL ARMY .44 PERCUSSION REVOLVER. A very nice example of this definitive American Civil War major sidearm, favoured by the Union Cavalry. The serial number.... 75649, was in the serial number range issued to the 16th Indiana Mounted Infantry, early in 1865, and there is covering documentation to this effect. A Martialy marked weapon, with a feint Union Cartouche stamped to the LHS lower part of the wooden grips. The o/a condition, is to a pleasing plumb brown patina, no pitting, and approx 20% original blue to protected areas. The action is sound, and the rifled bore good. A 6 shot, 44 caliber, percussion, Single Action revolver This is the New Model Army, with the later barrel, cylinder pin, hammer, safety notches, and 3 line barrel address ....it succeeded the Old Model Army.

US REMINGTON NEW MODEL ARMY PERCUSSION REVOLVER. A Six-shot round cylinder, 44 cal.Percussion revolver, with an 8" octagon barrel; with threads visible at the breech end, and safety notches on the cylinder shoulders, between the nipples. The Barrel markings to the top flat: "Patented Sept.14, 1858 E.Remington & Sons, Ilion, New York, U.S.A. New Model"......stamped clearly in 3 lines. There is a standard screw in type steel front sight. This example now to a pleasing pumb brown finish, with no pitting, an excellent bore, and various inspectors initials to the metal work. The walnut grips were varnished at some time, now wearing off, but the grips are otherwise in vg condition, with no chips or splits. The serial number 121516, is clearly stamped beneath the barrel, and to the bottom LHS of the grip frame. There is no obvious cartouche to the LHS grip. The action and indexing to 1/2 and full cock, is stong and tight. This model was one of the major handguns of the Civil War, and the stiffest competitor to the Colt Model 1860 Army, and post war, used in the Indian Wars. Buffalo Bill Cody carried one. The serial numbers carried on from the earlier 1861 model. C1865.

US SHARPS NEW MODEL 1863 PERCUSSION RIFLE. A fine example of one of the definitive weapons of the US Civil War, now very difficult to find in any condition. A 52 calibre percussion straight capping breech loader, with the Sharps pellet priming system, integral with the lockplate. These Military rifles had a 30" round barrel, fastened with 3 barrel bands, and an Iron Patchbox to the RHS of the butt stock. The total number made of the 1863 Model, was 7000, and the serial number range was C30000 to C40000. These were all late war time production C1865, and this example has a serial number C38348. These serial numbers also include all rifles and carbines ever produced by the Sharps factory. There were approx 10 carbines to each rifle produced. The barrel is now to a plumb brown patina, with no pitting. It has the standard Lawrence patent rear ladder sight, and block front sight with iron blade foresight. The bore is vg, with clear rifling, and only minor stains. The receiver/breech block, which were casehardened, are now to a dark grey patina, with areas of speckling of age. All standard markings/patents stamped to either side, are clear and little worn. The 2 piece walnut stock is in vg condition, with no evidence of splits and only minor dings and bruises of age and use. There are 2 very clear inspectors cartouches to the LHS wrist area of the butt stock. The manufacturers address and model year are clearly stamped to the top of the barrel. Complete with two sling swivels. The underlever, and percussion hammer actions are strong and tight. Early issued examples,were namely the 1859 model [ all models were virtually identical, and only differentiated by the model, and serial number]... and later, the 1865 post Civil War model. The term "Sharpshooter" derives from the early use of the 1859 model by Col. Hiram Berdans 2 regiments of Sharpshooters, [or shooters of Sharps Rifles.].

US WINCHESTER MODEL 1894 REPEATING RIFLE IN 32.40 CALIBRE. This was Winchesters first lever action rifle made for smokeless powder cartridges, and is their most successfull centrefire rifle, of all models previously produced. Manufactured from 1894 to 1975, and 3 million produced in total. This example serial numbered: 917555, made C1922. With a 26" round barrel, and a full length tubular magazine. There is a high % of blue finish, in excellent condition, and no pitting. The Winchester logo is stamped to the LHS of the barrel: "Manufactured by the Winchester Repeating Arms Co. New Haven Conn. U.S.Patented August 21 1894" There are traces of colour case hardening to receiver, underlevers hammers and buttplate. To the top breech Tang is inscribed: "Model 94 Winchester, trademark stamps". The action is tight, and the bore....32.40 cal...very good, with clear rifling, and no pitting. There is the standard Buckhorn adjustable rear sight, and blade type adjustable foresight. The 2 piece varnished walnut stock is in excellent condition, and only has minor dings of use.

US WINCHESTER MODEL 1894 REPEATING RIFLE, IN 32.40 CF. Manufactured from 1894 to 1980s, total production 3million +. Those with a serial number below 147684, were made before 1898. This example, serial number 53034, was made C1896. The model 1894 was Winchester's first lever action rifle made for smokeless powder cartridges, and was their most successfull CF rifle ever produced. This example has a standard 26" round barrel, with a full length tubular magazine, and retaining a high % of blueing, in vg condition. There is a standard, buckhorn rear sight, and blade foresight. The rear crescent shaped butt plate, also retains some blueing. The receiver, underlever, upper and lower tangs are in vg condition, with no pitting, and now to a pleasing silver/grey patina of age. The full Winchester address, patents are clearly stamped to the LHS barrel, and also: "-Nickel Steel Barrel- Especially for smokeless powder". The calibre 32.40 is clearly stamped to the rear of the barrel. The bore is excellent, with clear rifling, and no pitting. To the top tang: "Model1894 Winchester Pat. Aug21.1894" The clear serial number is stamped to the bottom front of the receiver. The 2 piece walnut stock is in vg condition, with minor dings and bruises of age and use, and is to a very nice patina. The underlever action is sound.

USA MARLIN MODEL 1893 RIFLE IN 32.40 CALIBRE. This example is virtually identical to item 1395. It has the serial number 434940, which puts it into the manufacture date: 1895 - 1916. It has a superior bore to the other example, otherwise, virtually identical. Photos can be sent if required.